|
|
||||||||
American Journal of Roentgenology, Vol 164, 225-227, Copyright © 1995 by American Roentgen Ray Society
ARTICLES |
MJ Combs, J Snell, WS Cail, T Maier and DA Buck
Department of Radiology, University of Virginia, Charlottesville 22908.
Referring physicians often are supplied with copies of images to illustrate a report of the findings of a radiologic study or so that the radiologist can retain the original images. The increasing costs of production, film, and recovery of chemicals have enhanced the requirement for a clean, low-cost dry printing process. An ink-jet gray- scale paper printer (Unitone, Scitex Medical Systems, Bedford, MA) can print high-quality (300 dots per inch [dpi]) images with an effective 10-bit gray scale range by using the Hertz continuous ink-jet method [1- 3], which does not require the use of a darkroom or hazardous chemicals. Several types of media (matte paper, glossy paper, transparency film) with a printing area of 26.9 x 43.7 cm (10.6 x 17.4 inches) may be used. The consumables are approximately 50-70% less expensive than the cost of silver halide film, providing a cost advantage over film for referral and archival copies. The results of an initial evaluation of the ink-jet printer at our institution are reported here.
This article has been cited by other articles:
![]() |
T. A. Bley, E. Kotter, U. Saueressig, O. S. Springer, D. Fisch, N. A. Ghanem, and M. Langer Using Receiver Operating Characteristic Methodology to Evaluate the Diagnostic Quality of Radiography on Paper Prints Versus Film Am. J. Roentgenol., December 1, 2003; 181(6): 1487 - 1490. [Abstract] [Full Text] [PDF] |
||||
| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |