Axial Compression Frame for MRI of Thoracolumbar Spine
Daniel S. J. Choy1,
Gian Paolo Tassi2 and
Richard B. Libes1
1 Laser Spine Center and Columbia University, 66 E 80th St., Suite 1A, New York,
NY 10021. 2 Casa di Cura Villa Anna, San Benedetto del Tronto, Pescara, Italy.
Fig. 1—MR image in patient having symptoms compatible with
L5–S1 disk herniation shows slight bulge (arrow) of L5–S1
disk. (Reprinted with permission from Choy DSJ. Percutaneous laser disc
decompression: a practical guide. New York, NY: Springer-Verlag,
2003:126–127 [5])
Fig. 2—MR image of patient in
Figure 1 obtained 5 minutes
later. Note increased protrusion of disk (arrow). (Reprinted with
permission from Choy DSJ. Percutaneous laser disc decompression: a
practical guide. New York, NY: Springer-Verlag, 2003:126–127
[5])
Fig. 3—Sitting MRI scanner (Flexview 8800, GE Healthcare) with which
image in Figure 2 was produced.
(Reprinted with permission from Choy DSJ. Percutaneous laser disc
decompression: a practical guide. New York, NY: Springer-Verlag,
2003:126–127 [5])
Fig. 4—First axial compression frame built of hard marine-grade
plywood, with shoulder restraints and a movable footboard with hardwood dowel
fixation. (Reprinted with permission from Choy DSJ. Percutaneous laser
disc decompression: a practical guide. New York, NY: Springer-Verlag,
2003:126–127 [5])
Fig. 5B—Compression Frame for MRI of Thoraco-Lumbar Spine (Steven
Weiburg, Inc.). Overall view of compression frame with vest connected to
footplate to evenly distribute pressure.
Fig. 6—Graph shows composite curves for observed means of
intradiskal pressure (kPa) and corresponding footplate pressure (kg). In
lumbar disk, 150 kPa corresponds to 189 lb (85.91 kg) of foot pressure. Black
line = raw means, short dashed line = quadratic model, long dashed line = log
model.
Fig. 7A—Representative MRI of lumbosacral spine. Sagittal T2 images
obtained with wood frame. A was obtained without compression and
B was obtained with compression. Marks indicate disk bulges.
Fig. 7B—Representative MRI of lumbosacral spine. Sagittal T2 images
obtained with wood frame. A was obtained without compression and
B was obtained with compression. Marks indicate disk bulges.
Fig. 8A—Representative MRI of lumbosacral spine. Sagittal images
obtained with aluminum frame. A was obtained without compression and
B was obtained with compression. Marks indicate disk bulges.
Fig. 8B—Representative MRI of lumbosacral spine. Sagittal images
obtained with aluminum frame. A was obtained without compression and
B was obtained with compression. Marks indicate disk bulges.